Histopathology Products

Product Details:

iVac 40 includes two polycarbonate jars of 2 litres each. The device has a complete ABS (plastic housing)

Product Details:

AccuCut SRM 200Perfect partner for precision sectioning The AccuCut SRM 200 Rotary Microtome is a heavy duty rotary microtome designed for sectioning of paraffin embedded specimens.

The AccuCut SRM 200 Rotary Microtome is used to thin section in microns the specimen embedded in the paraffin block. Routinely most specimens are sectioned at 35 microns. To accomplish this procedure the paraffin block the cassette backing is mounted in a moveable chuck. Chuck movement is up and down past a blade edge and front and back movement in given micron increments. Given this movement the block is sectioned during each pass across the blade edge. The result is a ribbon of successive sections each section being x number of microns deeper into the block than the preceeding section.The AccuCut SRM 200 is a manually operated rotary microtome. 

Benefits:

• Locking the handwheel quickly safely in any position

Specimen Orientation: Three axis orientation 

• Horizontal: 8 Degree
• Vertical: 8 Degree
• Rotation: 90 Degree

Displacement of Blade Holder Base:

• North South: Maximum: 55 mm (Vertically) with all adapters attached: 40 mm East / West: 45 mm

Section Thickness Selection Increments:

• From 0 to 2 Micro m in 0.5 Micro m
• From 2 to 10 Micro m in 1 Micro m 
• From 10 to 20 Micro m in 2 Micro m 
• From 20 to 60 Micro m in 5 Micro m

Product Details:

We Customize your needs for accurate grossingAccuEdge Grossing Stations come in various configurations and shapes constructed from highquality stainless steel
Grossing and trimming is, as fixation, a crucial activity in the histopathology laboratory to be able to deliver the highest quality slide, as described in all literature. Properly grossed tissue samples have the dimension of a ???quarter???, no more than 2-3 mm in thickness and 2 cm2 in outer dimensions, as described by Mark D. Wick in the book Diagnostic Histochemistry. (Annex III) Sakura Finetek offers a full range of products, which will facilitate the pathologists and histo technicians in achieving the best results in the safest environment for their grossing room.

With the Accu-Edge?? Grossing Stations, Sakura offers the opportunity to customize a grossing station to meet your laboratory???s specific needs. They are built from surgical grade stainless steel and promote standardized performance while enhancing grossing capabilities. Available in four different models with over 40 optional accessories, you are able to build your Grossing Station with a maximum of flexibility.

Accu-Edge?? Grossing Stations come in various configurations and shapes like the Elevating Grossing Station with or without hands free controls, a space saving Countertop Station or an economical Pathology Workstation. 

Features:

• 3 Reading mode for flow cell
• Cuvette & tube
• Easy to use with touch screen
• Mouse Keyboard and barcode or bar code reader
• 7 Colour display with touch screen operations

Benefits:

• Adjustable counter height in elevating models

Specification:

Accurate & precise results with long life 8 IAD Filters (340nm ??? 670nm)

Accu-Edge^?? Elevating Grossing Station with Infrared Controls (Item Code: 0305)

• Dimensions W x D x H: 152 x 76 x 216 - 246 cm
• Constructed from high-quality stainless steel.`
• The counter height can easily be adjusted from 81 to 112 cm
• Vacuum breaker-protected water supply.
• Two ventilation options
• 0.65 Horse Power disposal
• Sink with mixing faucet
• Easily accessible control panel
• Ample lighting
• Formalin container with spigot
• Magnetic instrument holder
• C-fold paper towel holder
• Polyethylene dissecting board
• Dissecting area rinse
• Spray hose assembly
• Infrared option provides hands free control of hot & cold water tap, disposal and dissecting area rinse

Accu-Edge^?? Elevating Grossing Station without Infrared Controls (Item Code: 0306)

• Dimensions W x D x H: 152 x 76 x 216 - 246 cm
• Constructed from high-quality stainless steel.
• The counter height can easily be adjusted from 81 to 112 cm
• Vacuum breaker-protected water supply.
• Two ventilation options
• 0.65 Horse Power disposal
• Sink with mixing faucet
• Easily accessible control panel
• Ample lighting
• Formalin container with spigot
• Magnetic instrument holder
• C-fold paper towel holder
• Polyethylene dissecting board
• Dissecting area rinse
• Spray hose assembly

Product Details:

TissueTek Cryo3 FlexSmooth frozen sections with optimal disinfection. The TissueTek Cryo3 Flex Cryostat is a precision instrument used to freeze and section tissue specimens. The instrument consists of a Cabinet with a refrigerated chamber Cryobar Blade Holder and Microtome.

Effortlessly obtain precise sections using the TissueTek Cryo3 Flex. Available in 3 configurations to meet every laboratories needs and budget demands. Choose from 3 models with features including motorized sectioning automated disinfection or both. No matter which model you choose you will benefit from time tested methods operator simplicity minimal maintenance and of course renowned TissueTek reliability

The instrument as part of the histopathology process is intended to facilitate the in vitro examination of human and animal tissue for morphology changes by a pathologist

Product Details:

TissueTek CytoTek 2500High cellular recovery with superb preservation of cellular structure The CytoTek 2500 Centrifuge is designed for the purpose of transferring cells onto a glass slide from cytological specimens contained in a specimen chamber through the process of centrifugation. The instrument aspart of the cytology process is intended to facilitate the in vitro examination of human and animal cells for morphology changes by a cytopathologist.

The CytoTek 2500 Cytocentrifuge is a benchtop centrifuge for cytological specimens that transfers cells from fluids to glass slides for microscopic examination. Cell dispersion on the glass slide is in a specific square area with all cells from the specimen deposited evenly on the slide. Paced acceleration is always on eliminating operator bias in assessing cell fragility. It will operate at speeds from 200 to 2.500 rpm adjustable in increments of 10 rpm for periods from 1 second to 99 minutes and 59 seconds adjustable in 1 second increments. Three sizes of specimen chambers are available for the unit 1 mL 6 mL and 12 mL chambers.

The CytoTek 2500 Cytocentrifuge offers the same high quality results as the previous model provided high cell recovery with superb preservation of cellular structure. Along with the quality the redesigned instrument with the removable guard bowl also provides enhanced safety features and user convenience. The CytoTek 2500 Cytocentrifuge combines user friendliness with high quality results

Features:

• Programmable processing times: 1 second to 99 minutes 59 seconds, selectable in one-second increments
• Sealable rotor housing with locking lid
• Transportable rotor housing
• Rotor housing monitor system alerts when rotor is out of balance
• Autoclavable rotor housing

Benefits:

• Aligned with the previous model and competitor equipment, allows users to process multiple slides in one run, reducing the total time required to finish the tasks
• More flexibility when processing the samples in the centrifuge
• Allows more force to be applied to process the sample
• More flexibility when processing the samples in the centrifuge
• No need to reprogram when new protocol is required
• Allows different sample types to be processed on the instrument
• Reduces aerosol exposure
• Protects operator while loading or unloading specimens
• Guarantees samples will be processed accurately and prevent damaging instrument
• Allows for safe and easy sterilization

Specification:

• The slides prepared on this instrument will have high cell recovery while preserving the cellular structure for better diagnosis.
• The removable guard bowl accommodates lab’s focus on user safety, equipment cleanliness and sterilization along with easier sample handling
• Accommodates 1, 6, 12mL sample chambers allows different sample types to be processed on the instrument
• Sealable rotor housing with locking lid Reduces aerosol exposure
• Transportable rotor housing protects operator while loading or unloading specimens 

Product Details:

The Tissue-Tek TEC 6 Embedding Console System offers reliability, comfort, and ease-of-use that users have come to know and expect from the Tissue-Tek TEC-series.

Designed to be the ideal conventional tissue embedder for laboratories of any size, the robust and ergonomic modular system offers you:

Convenience in conventional embedding Colour touchscreen with easy-to-navigate onscreen controls allows easy setup and operation. Graphical user interface enables users to set and display temperatures in all heated and cooled areas with just a touch. Multiple levels of brightness for the LED work light can be adjusted directly from the main screen. Automatic ready and shutdown times for both the Embedding and Cryo Modules are user-programmable by day of the week and even across overnight shifts. Modules can be arranged either left-to-right or right-to-left based on user preference and comfort. The large, nylon surface of the Cryo Module has raised edges to contain moisture and provides ample space for up to 60 embedded blocks. 


Features:

 

Safe and reliable embedding with ease Anti-glare, coated work surfaces reduce eye strain and provide better visual identification of tissues. Adjustable LED lighting improves specimen visibility while eliminating workplace clutter from external lighting or lamps. The software-driven Clean Mode provides an easy method for cleaning the forceps wells, reducing opportunities for cross contamination of tissue blocks. The optional Tissue-Tek^® TEC™ 6 Magnifying Lens allows users to keep a close eye on even the smallest biopsies to ensure proper orientation.


Specification:

Temperature Control Embedding Console

Heated area & Programmable range:

• Paraffin Chamber 50 to 75°C
• Left and right warming chambers: 50 to 75°C
• Hot plate: 50 to 75°C

Cold spot temperature: 15°C or below (room temperature of 25°C, no wind, no load (nothing on the cold spot))

Temperature Control Cryo Console:

• Lowest temperature achievable - -5°C ± 3,5°C or below (Room temperature of 25°C, with no wind, measured at the center of the cold plate under no loaded environment)
• Time to reach at a setting -5°C - Within 30 min after started to operate (Room temperature of 25°C, with no wind, measured at the center of the cold plate under no loaded environment)

 

Capacity:

• Paraffin Chamber - 4 L
• Left and Right thermal chambers - 1.5 L or up to 150 cassettes
• Working area - up to 20 cassettes
• Cryo plate - up to 60 blocks

Product Details:

Tissue safety meets Reliability setting new standards in processingThe TissueTek VIP 6 AI Vacuum Infiltration Processor is a selfcontained floorstanding automatic tissue processor used to process tissue specimens. It holds up to 300 tissue cassettes and comes with added features of Advance Solution Manager & iSupport.
This VIP 6 AI is designed for automatic processing purposes in an enclosed single processing chamber. The VIP® 6 AI runs cycles of fixation, dehydration/defatting, clearing, and paraffin infiltration of tissue specimens which are necessary for sample preparation in histological studies and examinations, conducted for the pathology, anatomy and clinical pathology fields.
The instrument is provided with a means of pumping a designated processing solution into a retort containing specimen baskets, processing them in a given time under predetermined conditions, and then pumping the solution out after a lapse of the time. These operations are automatically performed in a single retort in accordance with predetermined processing steps.
After completion of the processing steps, specimen baskets are removed from the retort. Paraffin is pumped out to the last paraffin container from the retort which is afterward cleaned with retort cleaning solutions.
Features:

• LCD color touch screen and intuitive windows based software
• External drain & fill Internal heated retort lid and condenser
• Ergonomic designed retort lid
• Automated reagent management system
• Four different level sensors
• Illuminated reagent check

Benefits:

• Easy access and graphical display of reagents, bulk reservoirs and retort. Linked to state-of-the-art  and user friendly software results in increased user convenience
• One fill/drain port for reagent reservoirs and 2 external fill ports for the bulk reservoirs enable users to exchange or fill reagents faster, increasing the speed by which reagents are exchanged or filled, hence workflow and limit the exposure to fumes of hazardous chemicals
• Absence of condensation and fumes in the retort increases reliability of tissue processing and limit the exposure to fumes of hazardous chemicals
• Quick and safe open/close of retort lid increases user convenience
• Quality of processing is improved, higher efficiency obtained due to reagent management system, eliminate the risk of tissue dry-out
• Four sensors prevent overflow in the retort and the load of too many cassettes. Besides, they ensure a safeguard level (2.7L for 150 cassettes and 3.5L for 300 cassettes) for all fluids. These features increase reliability by eliminating the risk of tissue dry out.
• Easy monitoring of reagent levels is possible, increasing reliability of the process

Specification:

• Program memory: Fifty processing programs, three user defined cleaning programs, one warm water flush program, one rinse cycle and optional drying cycle
• Pressure/vacuum agitation: Selectable, p/v cycle: pressure, ambient and vacuum are cycled in the retort during processing; V cycle: ambient and vacuum are alternated in the retort during processing
• Pump in/out mixing: Two different mixing functions: 1) agitation by completely pumping reagent in and out (either fast in 12 minutes or slow which takes 20 minutes) or 2) agitation by pumping reagent in and out while specimens are completely immersed (either continuous during the complete process or short/instantaneous between the level sensors).
• Valve system: One rotary valve and one gate valve for reagent and paraffin transfer, and external drain and fill, heat on or off
• Fail-safe systems: Solution manager substitutes compatible solution to complete the run and automatic reversal of pumping action to insure specimens remain submerged

Product Details:

No more mix-up’s The Tissue-Tek AutoWrite uses bubble jet technology in cassette printing. The high resolution of this technique (up to 360 dpi) made it possible to print, next to characters and numbers, logo’s and different kinds of barcode on a cassette/slide. Cassette Printers will provide the Histology and Cytology-laboratories with an opportunity for high quality and high speed printing of both cassettes and glass slides.

The Tissue-Tek AutoWrite Cassette Printer will provide the Histology and Cytology-laboratories with an opportunity for high quality and high speed printing of both cassettes and glass slides.

The operation of the printers is simply and easily, mainly to the design of the easy accessible keypad, like with ordinary jet printers. Thus after installation of the Tissue-Tek AutoWriteprinters, one can operate these printers without extra effort, training or time consuming actions of the laboratory-employees.       


Features:

• High resolution printing
• High Speed
• Cartridge Unload Station
• Unload Station
• Cartridge 

Benefits:

• Capability of printing text in different fonts and sizes, logo’s and readable 1-D and 2-D barcodes.
• Especially in case of batch printing the speed is extensively higher compared with current printers available in the market, up to 900 cassettes and per hour.
• Easy and fast replacement of the ink and the cleaning fluid. The cartridges are exchangeable between the Cassette and the Slide Printer. Reagent resistant, non erasable ink
• Reducing time by sorting up to 110 Glass Slides or Cassettes. 

Specifications for Tissue-Tek Auto Write Slide Printer:

Product Details:

The Tissue-Tek DRS 2000 Multiple Slide Stainer was specially developed and constructed for laboratories with a large number of specimen requiring a wide range of staining procedures.

The Tissue-Tek DRS 2000 will be used primarily for routine staining procedures in Histology and Cytology Laboratories in performing multiple staining procedures randomly or in batch mode. The Tissue-Tek DRS 2000 can also be used in Haematology and Microbiology.

The Tissue- Tek DRS 2000 Multiple Slide Stainer is a new concept allowing you to run different staining protocols at the same time and to take appropriate reagent control, as well as having higher throughput, better productivity and space-saving design, by such new features as:

• Continuous Loading
• New Agitation system
• Double-Decker Reagent Platform
• Flexible Processing Stations
• Interactive Programming

Product Details:

Compact with dual benefitsThe Lab Aid Ultra II is a large capacity storage unit for storing slides and blocks equipped with locking feature for security. The maximum storage capacity is approximately 96000 slides or 22000 blocks or anything in between if both the slides and blocks are stored in the same cabinet.

The Lab Aid Ultra II is a large capacity storage unit for storing slides and blocks equipped with locking feature for security. The maximum storage capacity is approximately 96000 slides or 22000 blocks or anything in between if both the slides and blocks are stored in the same cabinet.

Features:

• 1.5 times stronger thanprevious model
• One cabinet for both Slidesand Cassettes
• Increased load capacity of thedrawer sliders
• New trays for Lab Aid UltraII
• Eliminates need to repackblocks when relocating

Benefits:

• The added thickness has made the cabinet sturdier and easier transportation to customers
• Easier to maintain stocks and reduces hassle of ordering the correct cabinet. Allows user to put both slides and cassettes in the same cabinet.
• With the introduction of the new trays, more slides and blocks can be stored in one drawer. The increased load capacity will allow the drawers to hold the extra load.
• The new trays have been resized so it can perfectly fit into each tray, eliminating the dead space created in the previous version. This will increase the number of slides and cassettes that can be placed in each drawer. When storing cassette blocks, these trays can also be stacked and can have double stacks in one drawer.
• The new trays can be purchased with a lid which eliminates the need of repackaging the cassettes. The tray with the lid can be removed from the drawer and used as is.